EKF - Short Profile
EKF - Short Profile


3U, High Performance Dual Core CompactPCI ® CPU Board

HTML documents available here

Ordered List

CCM-BOOGIE Core™ 2 Small Form Factor CPU
PDF documents available here

Product Information
User Guide

Application Note
Power Event (Power Down)

General Information
Mezzanine Overview
C4x Series Overview
Mezzanine Concept

Low Profile Mezzanine Modules
C20 | C40 | C41 | C42 | C43 | C47

Side Boards 4HP Pitch
C23 | C32 | C44 | C45 | CCI | CCJ | CCK | CCL | CCO

Rear I/O Transition Module
Download area for drivers
BIOS Update

Graphics Driver
Embedded Graphics Driver
Ethernet Driver ETH1
Ethernet Driver ETH2
Chipset Software
Matrix Storage Manager
Turbo Memory Driver

HD Audio Drivers

SpeedFan   Cfg. Data
Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware and BIOS Updates
E-Mail on BIOS Update Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware and BIOS Updates, English
E-Mail bei BIOS Update Abonnement EKF NewsFlash, ein E-Mail Dienst mit Ankündigungen neuer Firmware/BIOS Updates, Deutsch
Download a photo in print quality Photo Gallery
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
Low Profile Mezzanine Modules
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17
Side Boards
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22
Rear I/O Transition Module
1 | 2
Print Quality 300dpi 10x15cm .JPG ©EKF
If setup for non-tabbed browsing, images are displayed in a secondary browser window


Dual Core High Performance CompactPCI ® CPU

Scalable from 1.2GHz Ultra Low Voltage Core™ 2 Duo to 2.26GHz Core™ 2 Duo
Dual-Screen Video • Dual Gigabit Ethernet • Dual-Channel Memory • 6 x SATA RAID

The CCM-BOOGIE is a versatile 4HP/3U CompactPCI® CPU board, equipped with an Intel® Core™ 2 Duo processor at up to 2.26GHz clock, and up to 6GB dual channel capable DDR3 RAM. Four native 3Gbps RAID capable Serial ATA channels are available for mass storage I/O, and in addition another two from a secondary RAID controller. The CCM-BOOGIE has been designed especially for systems which require dual core high performance at moderate power consumption.

The CCM-BOOGIE is provided with a high performance mobile chipset (Intel® GS45) which operates at up to 1066MHz FSB and up to 1066MHz DDR3 memory clock for optimum system throughput. The chipset is based on PCI Express® technology and has a powerful integrated graphics accelerator. The DVI-I front panel connector enables dual screen video operation. Two Gigabit Ethernet controllers are provided for high speed connectivity (one of them IEEE 802.1as TimeSync compliant).

CCM-BOOGIE with SATA SSD - Rugged and Cool High Performance

CCM-BOOGIE with SATA SSD - Rugged and Cool High Performance CPU

The CCM-BOOGIE is equipped wit a set of local expansion interface connectors, which can be optionally used to directly attach a suitable (application specific) mezzanine side board, e.g. for audio- and legacy support, PCI Express based I/O circuitry, and a secondary DVI video output. Carrier board and side card come as a readily assembled 8HP unit typically. Most mezzanine cards can accommodate in addition a 2.5-inch drive. Also as an option, a suitable rear I/O transition module is available to the CCM-BOOGIE.

As a popular add-on option, the CCM-BOOGIE can be delivered with a small mezzanine module (C42-SATA), which accommodates a 1.8-inch SATA solid state drive (SSD). Alternatively, the C40-SCFA mezzanine card is provided with an industrial grade CompactFlash memory card, and/or an even more rugged USB Silicon State Drive (SSD). Both mezzanine modules fit into the 4HP envelope of the entire assembly.

Benefits of the CCM-BOOGIE
  • High Performance CompactPCI System Slot Controller with or w/o Rear I/O
  • Hybrid Systems Option 1 (Dual Backplane CompactPCI® & CompactPCI® Serial)
  • Hybrid Systems Option 2 (Dual Backplane CompactPCI® & CompactPCI® Express)
  • Intel® Core™ 2 Duo SV (45nm Penryn) Mobile Processor 2.26GHz 6MB L2 Cache (FSB 1066MHz)
  • Scalable Series of Small Form Factor (SFF) Processors from 1.2GHz to 2.26GHz
  • Cool Operation by Means of ACPI UEFI BIOS
  • PCI Express Mobile Intel® 45 Express Chipset GS45 (Cantiga)
  • Up to 6GB DDR3 Memory (Dual Channel Mode Capable, up to 1066MHz)
  • One Memory Bank Soldered (Low Memory) for Extreme Ruggedized Systems
  • Dual-Screen Graphics Controller
  • Dual Gigabit Ethernet Controllers
  • Four Native SATA Channels 3Gbps, Intel® Matrix Raid Storage Technology
  • Two Additional SATA Channels 3Gbps, RAID capable with JMicron Drivers
  • Eleven USB 2.0 channels
  • 1.8-Inch SATA SSD with C42-SATA Mezzanine Module Option (4HP Maintained)
  • CompactFlash and/or USB SSD with C40-SCFA Mezzanine Module Option (4HP Maintained)
  • Variety of Mezzanine Expansion Boards Available with and w/o PCIe
  • TPM 1.2 Option (on Mezzanine Expansion Board or GS45 Internally)
  • Rear I/O Transition Module Option
  • RoHS compliant

CCM-BOOGIE - Versatile Expansion Interfaces

CCM-BOOGIE - Versatile Expansion Interfaces

CCM-BOOGIE Block Diagram

CCM-BOOGIE Block Diagram


Feature Summary CCM-BOOGIE
Form Factor Single size CompactPCI style Eurocard (160x100mm2), front panel width 4HP (20.3mm)
Processor Designed for Intel® Core™ 2 Duo SFF (Small Form Factor) processors (codename Penryn), 1066/800MHz FSB, maximum junction temperature 105°C, Enhanced Intel® Speedstep® Technology, Dual Core Multiprocessing, Intel® Virtualization Technology (VT), Intel® 64 Architecture
  • Core™ 2 SV • SP9300 • 2.26GHz • FSB 1066MHz • 6MB L2 Cache • 25W TDP
  • Core™ 2 LV • SL9400 • 1.86GHz • FSB 1066MHz • 6MB L2 Cache • 17W TDP
  • Core™ 2 ULV • SU9300 • 1.2GHz • FSB 800MHz • 3MB L2 Cache • 10W TDP
  • Celeron® M ULV • 722 • 1.2GHz • FSB 800MHz • 1MB L2 Cache • 5.5W TDP
Chipset Mobile Intel® 45 (Codename Cantiga) chipset comprised of:
  • GS45 Graphics/Memory Controller Hub (GMCH) with Intel® Gen. 5.0 integrated graphics engine with 10 fully-programmable cores, 1600x1200 dual independent display, HW support for H.264, MPEG2, VC-1, improved 3D capability (DirectX 10/OpenGL 2.0 support), estimated 533-MHz core render clock (low-power mode 266MHz), option Integrated Trusted Platform Module (ITPM)
  • ICH9M-E Enhanced I/O Controller Hub, integrated GbE MAC, 12 x USB (2 x EHCI, 6 x UHCI cntrls.), 4 x SATA 3Gbps, Intel® Matrix Storage Technology (RAID 0, 1, 5, 10), High Definition Audio, unified SPI Flash support
Memory (RAM)
  • Maximum theoretical memory capacity of 8GB DDR3 up to 1067MHz
  • 512Mb, 1Gb, 2Gb technologies for x8 and x16 devices
  • Dual channel symmetric - memory addresses interleaved for increased performance, but memory module sizes must match
  • Intel® Flex Memory Technology (dual channel interleaved mode with unequal memory population) - memory module sizes maybe unequal in both the channels
  • Dual channel asymmetric - memory module sizes may differ, including no memory in the second channel (single-channel)
  • Channel 0 populated as directly soldered DDR3 devices (Low Memory) up to 2GB
  • Channel 1 provided as SODIMM socket to accommodate DDR3 module PC3-8500 up to 4GB
Non Volatile Memory
  • Intel® Turbo Memory card (codename Robson) on CCI-RAP mezzanine side board optionally available
  • PCI Express Mini Card 1G Byte Flash
  • Microsoft® ReadyDrive and ReadyBoost (Windows® Vista)
  • Intel® Turbo Memory driver
  • Both (concurrently) analog monitor and digital flat-panel display support by DVI-I connector (front panel), up to QXGA 2048x1536 pixel 16M colours @75Hz refresh rate (analog), up to 1600 x 1200 pixel 16M colours @60Hz (digital), incorporates PanelLink Digital technology (Silicon Image).
  • Dual screen capable 2 x 1600 x 1200 pixel (one display attached to the front panel, the other to the back panel, or both to the front panel by means of a DVI-I to DVI-D/VGA splitter cable, or secondary DVI-D connector on mezzanine side board)
  • Front panel option: D-Sub (female HD15) VGA connector available, replaces DVI-I connector
  • Rear I/O option: Analog video output configurable (BIOS) across J2/P2 CCT-RIO rear I/O transition module
  • Mezzanine option: Secondary DVI-D connector at mezzanine card front panel allows for dual digital flat panel operation, suitable mezzanine modules e.g. CCO-CONCERT, CCI-RAP
  • All ports over-current protected, data transfer rate of up to 480Mbps, conforming to USB2.0
  • 2 x USB type A connector (front panel)
  • 3 x USB J2/P2 Rear I/O option (CCT-RIO rear I/O transition module)
  • 2 x USB ports expansion interface option (in use by several mezzanine side boards)
  • 4 x USB ports via J-HSE (C40-SCFA mezzanine storage module)
  • Dual EHCI / six UHCI controllers provided by ICH9M-E
  • Two 10/100/1000Mbps Gigabit Ethernet controllers, accessible via RJ45 jacks from the front panel
  • ETH1 equipped with Intel® 82567 PHY (MAC provided by ICH9M-E), Jumbo Frame support up to 9KB
  • ETH2 equipped with Intel® 82574L GbE controller, connected to local PCIe lane, supports 9018-byte jumbo packets, TimeSync Offload compliant with 802.1as specification
  • Option ETH1 Gigabit Ethernet configurable (BIOS setup) across J2/P2 with attached CCT-RIO rear I/O transition module
SATA (Serial ATA)
  • Total of six 3Gbps SATA channels available
  • Triple-channel Serial ATA 3Gbps available for J2/P2 rear I/O option (derived from ICH9)
  • Suitable rear I/O transition module CCT-RIO (2 x system internal SATA, 1 x eSATA for attachment of external devices)
  • Intel® Matrix Storage Technology MST (Raid 1, 0, Matrix Raid)
  • Secondary on-board PCIe to SATA controller JMB362, dual channel SATA RAID, available via J-HSE expansion connector (plus 1 SATA channel in addition from ICH9)
  • Additional PCIe to SATA controller on mezzanine side boards e.g. CCI-RAP, CCK-MARIMBA, CCL-CAPELLA, CCO-CONCERT
  • Option mezzanine module attached to J-HSE expansion connector
  • C40-SCFA mezzanine module available with on-board SATA to PATA bridge and CompactFlash socket
PCI Express
  • 4-Lane PCIe high-speed connector J-PCIE for CCJ-RHYTHM and other mezzanine expansion cards (side boards)
  • Possible configurations 1 Link x 4 Lanes or 4 Links x 1 Lane
Mezzanine Side Board I/O
  • J-EXP Legacy expansion interface connector LPC/USB/Audio (SIO, USB, HD Audio)
  • J-HSE High-speed expansion interface connector (3 x SATA, 4 x USB)
  • J-PCIE PCI Express 4-lane high-speed expansion connector
  • J-SDVO secondary digital graphics port high-speed expansion connector
  • Suitable mezzanine companion boards available, e.g.:
    • CCI-RAP: 2 x PCI Express® Mini Card sockets (WLAN, GSM, Wimax, Intel® Turbo Memory), options secondary DVI-D, IEEE 1394 (FireWire), USB SSD, C20-SATA mezzanine storage module (accommodates up to 2 SATA hard disk drives 2.5-inch RAID capable)
    • CCJ-RHYTHM: CompactPCI® Express system slot controller function by on board 6-port 24-lane PCIe switch, options DVI-D, IEEE 1394 (FireWire)
    • CCK-MARIMBA: PMC/XMC module carrier, option C20-SATA mezzanine storage module
    • CCL-CAPELLA: Up to 4 Gigabit Ethernet ports, options IEEE 1394 (FireWire), USB SSD, C20-SATA mezzanine module
    • CCO-CONCERT: Audio analog/digital, option secondary DVI-D
    • C23-SATA: PCIe to 2 x SATA 1 x PATA controller
    • C40-SCFA: SATA to PATA bridge & CompactFlash header, option USB SSD, 4HP envelope maintained
    • C41-CFAST: CFast™ Flash card header, 4HP envelope maintained
    • C42-SATA: C1.8-Inch SATA Solid State Drive, 4HP envelope maintained
Rear I/O
  • Suitable rear I/O transition module CCT-RIO available
  • 3 x Serial ATA (SATA), 2 x system internal SATA connectors, 1 x external eSATA connector
  • 1 x Gbit Ethernet (switched by BIOS between front panel I/O and rear I/O)
  • 3 x USB
  • VGA Analog Video (switched by BIOS between front panel I/O and rear I/O)
  • PS/2 Keyboard, Mouse
  • COM port (TTL Level)
  • ICH9M-E integrated 32-bit PCI bridge, 133MBps CPCI master
  • Additional PCI arbiter in PLD for fully figured 8-slot CompactPCI backplane
  • +5V V(I/O) default configuration (PCI pull-up resistors 1k - blue coding key on J1)
  • +3.3V V(I/O) on request (PCI pull-up resistors 2.7k - yellow coding key on J1)
CompactPCI® Express
  • CCM-BOOGIE can be configured as CompactPCI Express System Board (system slot controller) by optionally available mezzanine expansion card (side board) CCJ-RHYTHM
  • CPCIe 4-Link configuration (4-lanes each), for up to 4 CPCI peripheral slots type 1 and/or type 2 on a passive CPCIe backplane
  • Suitable also for hybrid CPCI/CPCIe systems/backplanes (e.g. Schroff)
Platform Management (on Request)
  • Hardware is ready for AMT 4.0 Intel® Active Management Technology (iAMT)
  • ARM core based Manageability Engine (ME) in the GMCH
  • Independent manageability firmware, stored in SPI Flash
  • No iAMT BIOS support available as of current
Secure Computing
  • Option Trusted Platform Module TPM 1.2 according to Trusted Computing Group specifications, available on several mezzanine boards such as CCO/CCI/CCJ
  • Choose from either integrated solution (GS45 Intel® Trusted Execution Technology), or available as discrete controller on several mezzanine boards e.g. CCO/CCI/CCJ
  • Discrete crypto engine silicon brands Infineon or Atmel at users choice
  • Phoenix UEFI BIOS with EKF enhancements for embedded systems
  • SPI Flash memory 2 x 16/32/64 Mb
  • Updates available from website ekf.com
Drivers (All Major OS)
  • Intel® graphics driver
  • Intel® networking driver
  • Intel® Matrix Storage Manager software
  • Intel® Turbo Memory driver
  • JMicron SATA driver
Thermal Conditions
Environmental Conditions
  • Operating temperature: 0°C ... +70°C (CPU dependent)
  • Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
EC Regulations
  • EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
  • 2002/95/EC (RoHS)
MTBF 141 x 103h (16 years) @ 50°C
Typical Power Requirements Board +3.3V +0.17V/-0.1V +5V +0.25V/-0.15V
CCM-6-BOOGIE 5.1/5.2A 2.1/2.1A 2.3/4.5A 0.3/0.5A
S3: 200mA
S4: 100mA
S5: 100mA
S3: 50mA
S4: 50mA
S5: 30mA
Typical Performance Rating
Measured with PCMark2005 under Windows XP, 2 x 2GB PC3-8500
Board Processor CPU/MEM Score
CCM-6-BOOGIE SP9300 5650
all items are subject to changes

Available as a rear I/O expansion board to the CCM-BOOGIE CPU card, the CCT-RIO is provided with several I/O port connectors, to be used either in addition to the CCM-BOOGIE front panel connectors or alternatively. Being mainly a passive rear I/O transition module, groups of signals from the CCM-BOOGIE CPU board are passed across the CompactPCI J2/P2 connector to the CCT-RIO. Some of the data lines are available locally on the CCT board for system internal wiring only, while other connectors such as VGA-Video and Gigabit Ethernet are mounted into the back panel for external use. USB and SATA (eSATA) channels are provided both on-board and externally.

Typically the CCT-RIO ist equipped with a 4-HP rear panel (20.3mm width). As a custom specific option, an 8-HP panel is available with additional connectors.

Utilization of the CCT-RIO transition module adds a level of I/O functionality that is not available with the CCM-BOOGIE CPU board alone. Further on, swapping the CPU card is simplified by means of rear I/O, which is important for efficient system maintenance (MTTR). Be sure to have ordered a CCM-BOOGIE rear I/O capable version and also the CPCI backplane suitable for rear I/O in order to use the CCT-RIO transition module.


Ordering Information
Please refer to List 20 for popular CCM-BOOGIE SKUs
For popular mezzanine modules and side cards please refer also to List 20

Sample CCM-BOOGIE Images
CCM-BOOGIE with CCI-RAP (PCI Express Mini Card Sockets) & C20-SATA Module

CCM-BOOGIE with CCI-RAP (PCI Express Mini Card Sockets) & C20-SATA Module

Exploded View CCO-CONCERT (C20-SATA Dual SSD on-Board, C32-FIO on Top)

Exploded View CCO-CONCERT (C20-SATA Dual SSD on-Board, C32-FIO on Top)
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail