BIOS update on EKF CCM-BOOGIE:
==============================

   A BIOS update is accomplished by programming the SPI (*1) flash
   memory on EKF CCM-BOOGIE.

   Follow the steps described below for a BIOS update on EKF CCM-BOOGIE:
   - Copy all files of the ZIP archive to a bootable DOS formatted
     device (preferable an USB stick)
   - Boot the system from this device
   - When the DOS prompt displays, press <PS> <ENTER>
   - Wait for end of programming, view result. If an error occurs
     during programming (which is very unlikely), try batchfile PS.BAT
     once more BEFORE the system is reset
   - When finished successfully restart your system with reset-button
     (front panel handle on CCM-BOOGIE), a power-off-on sequence or by
     pressing CTRL-ALT-DEL

   WARNING:
   Do not interrupt the programming procedure in order to avoid
   damage of the Flash. Programming takes max. 100 seconds if the
   BIOS binary is loaded from a (USB) floppy disk and about 30 seconds
   when the binary is loaded from an USB-Stick or a harddisk.

   The new BIOS is present after resetting the system. If the
   format of CMOS parameter has changed compared to the previous
   BIOS version, all CMOS parameter will now automatically reset
   to default settings.

   (*1) SPI = Serial Peripheral Interface


Any questions? Send an Email to support@ekf.de

2009-07-23 EKF