|
PC2-LIMBO • Intel® Atom™ E6xx Series CPU
|
The PC2-LIMBO is equipped wit a set of local expansion interface connectors,
which can be optionally used to attach a mezzanine side board. A variety of
expansion cards is available, e.g. providing legacy I/O and additional PCI Express
based I/O circuitry such as SATA and Gigabit Ethernet, or a secondary video output.
Most mezzanine side cards can accommodate in addition a 2.5-inch drive.
|
|
Typically, the PC2-LIMBO and the related side card would come as a readily
assembled 8HP unit. As an alternate, Flash based mezzanine storage modules
are available that fit on the PC2-LIMBO while maintaining the 4HP profile.
The C47-MSATA module e.g. accommodates two mSATA SSDs and can be operated in RAID mode.
The C42-SATA module is provided with a 1.8-Inch Micro SATA SSD up to 800GB.
|
|
Benefits of the PC2-LIMBO
|
- CompactPCI® System Slot Controller
- CompactPCI® PlusIO Rear I/O According to PICMG® 2.30
- Hybrid Systems Option (Dual Backplane CompactPCI® and CompactPCI® Serial)
- Based on the Intel® Queens Bay Platform (Tunnel Creek CPU, Topcliff PCH)
- Intel® Atom™ Series E6xx Mobile Processor, Power Optimized CPU, Integrated Graphics Engine
- E620(T) Processor 0.6GHz 3.3W TDP (T = -40°C to +85°C)
- E640(T) Processor 1.0GHz 3.6W TDP (T = -40°C to +85°C)
- E660(T) Processor 1.3GHz 3.6W TDP (T = -40°C to +85°C)
- E680(T) Processor 1.6GHz 4.5W TDP (T = -40°C to +85°C)
- DDR2 Soldered Memory up to 2GB
- Integrated Graphics Controller (Front Panel: DVI or VGA Connector Option)
- Max Resolution 1920x1080
- Intel® EG20T (Topcliff) Platform Controller Hub (PCH)
- Dual Gigabit Ethernet Controllers (Individually BIOS Controlled either F/P or J2 RIO)
- Two Native SATA Channels 3Gbps
- Four Additional SATA Channels 3Gbps, Mezzanine Usage (Option on Request)
and/or Rear I/O (JMicron Controllers, no BIOS Boot Support as of Current)
- Twelve USB 2.0 Channels
- CFast™ Card Host Connector on-Board (SATA 3Gbps I/F)
- microSD Host Connector (up to 32GB Class 6 Speed microSDHC Card Support)
- SATA 1.8-Inch Solid State Drive (SSD) up to 800GB with C42-SATA Mezzanine Module Option (4HP Assembly Height Maintained)
- CompactFlash and/or USB SSD with C40-SCFA Mezzanine Module Option (4HP Maintained)
- Secondary CFast™ Card Host Connector with C41-CFAST Mezzanine Module Option (4HP Maintained)
- On-Board PCI Express® Packet Switch (4 Lanes available for Rear I/O and CPCI Serial
Backplane Respectively, another 1 Lane for Mezzanine Side Card)
- Legacy I/O Expansion Connectors (CAN2.0B, HD Audio, LPC, PS/2, UART)
- High Speed I/O Expansion Connectors (LVDS, PCI Express®, SATA, USB)
- Variety of Mezzanine Expansion Boards (Side Cards) Available with and w/o PCIe
- Most Mezzanines Optionally Equipped with 2.5-Inch Single- or Dual-Drive
- Rear I/O Transition Module Option (e.g. PR1-RIO)
- +5V Only Design, on-Board 3.3V Regulator Can Supply CPCI Peripheral Slot Cards
- UEFI Phoenix BIOS with ACPI
- Long Term Availability
- Coating, Sealing, Underfilling on Request
- RoHS compliant
|
|
PC2-LIMBO
|
CompactPCI® PlusIO (PICMG 2.30) is a new standard for rear I/O across J2,
specified by the PICMG®. High speed signal lines (PCI Express®, SATA,
Gigabit Ethernet and USB) are passed from the PC2-LIMBO through the special
UHM connector to the backplane, for usage either on a PlusIO rear I/O
transition module, or CompactPCI® Serial card slots.
|
|
CompactPCI® Serial (PICMG CPCIS.0) defines a completely new card slot,
based on PCI Express®, SATA, Gigabit Ethernet and USB serial data lines.
On a hybrid backplane, both card styles can reside, CompactPCI® and
CompactPCI® Serial, with the PC2-LIMBO in the middle as system slot
controller for both backplane segments.
|
|
PC2-LIMBO • High Speed Rear I/O Backplane Connector J2 UHM
|
|
PC2-LIMBO • Simplified Block Diagram
|
|
|
Ordering Information |
Please refer to List 21 for popular PC2-LIMBO SKUs
For popular mezzanine side cards please refer to List 20
|
|
SRP-4401 Rugged Hybrid Systems CPCI Classic & CPCI Serial
|
|
